Compression properties of z-pinned composite laminates

The effect of z-pinning on the in-plane compression properties and failure mechanisms of polymer laminates is experimentally studied in this paper. The reduction to the compression modulus, strength and fatigue performance of carbon/epoxy laminates with increasing volume content and diameter of pins is determined. The elastic modulus decreases at a quasi-linear rate with increasing pin content and pin diameter. Softening is caused by fiber waviness around the pins and reduced fiber volume content due to volumetric swelling of the laminate from the pins. A simple model is presented for calculating the compression modulus of pinned laminates that considers the softening effects of fiber waviness and fiber dilution. The compression strength and fatigue life also decrease with increasing volume content and diameter of the pins. The strength and fatigue properties are reduced by fiber kinking caused by fiber waviness around the pins and the reduced fiber content caused by swelling. The deterioration to the compression properties is also dependent on the fiber lay-up pattern of the laminate, with the magnitude of the loss in properties increasing with the percentage of 0° (load bearing) fibers in the laminate. The paper gives suggestions for minimizing the loss to the compression properties to laminates due to pinning.