The influence of field size on stopping-power ratios in-and out-of-field: Quantitative data for the BrainLAB m3 micro-multileaf collimator

The objective of this work is to quantify the systematic errors introduced by the common assumption of invariant secondary electron spectra with changing field sizes, as relevant to stereotactic radiotherapy and other treatment modes incorporating small beam segments delivered with a linac-based stereotactic unit. The EGSnrc/BEAMnrc Monte Carlo radiation transport code was used to construct a dosimetrically-matched model of a Varian 600C linear accelerator with mounted BrainLAB micro-multileaf collimator. Stopping-power ratios were calculated for field sizes ranging from 6 x 6 mm(2) up to the maximum (98 x 98 mm(2)), and differences between these and the reference field were computed. Quantitative stopping power data for the BrainLAB micro-multileaf collimator has been compiled. Field size dependent differences to reference conditions increase with decreasing field size and increasing depth, but remain a fraction of a percent for all field sizes studied. However, for dosimetry outside the primary field, errors induced by the assumption of invariant electron spectra can be greater than 1%, increasing with field size. It is also shown that simplification of the Spencer-Attix formulation by ignoring secondary electrons below the cutoff kinetic energy applied to the integration results in underestimation of stopping-power ratios of about 0.3% (and is independent of field size and depth)