RMIT University
Browse

Direct yaw moment control for electric vehicles with independent motors

Download (8.59 MB)
thesis
posted on 2024-11-23, 14:33 authored by Chunyun Fu
Direct Yaw Moment Control (DYC) systems generate a corrective yaw moment to alter the vehicle dynamics by means of active distribution of the longitudinal tire forces, and they have been proven to be an effective means to enhance the vehicle handling and stability. The latest type of DYC systems employs the on-board electric motors of electric or hybrid vehicles to generate the corrective yaw moment, and it has presented itself as a more effective approach than the conventional DYC schemes.

In this thesis, a wide range of existing vehicle dynamics control designs, especially the typical DYC solutions, are investigated. The theories and principles behind these control methods are summarized, and the features of each control scheme are highlighted. Then, a full vehicle model including the vehicle equivalent mechanical model, vehicle equations of motion, wheel equation of motion and Magic Formula tire model is established.

Using the derived vehicle equations of motion, the fundamental mathematical relationships between the corrective yaw moment produced by the DYC system and the crucial vehicle states (the yaw rate and vehicle side-slip) are derived. Based on these relationships, two DYC systems are proposed for electric vehicles (or hybrid vehicles) by means of individual control of the independent driving motors. These two systems are designed to track the desired yaw rate and vehicle side-slip, respectively. Extensive simulation results verify that these systems are effective in improving vehicle dynamic performance.

Apart from the two systems that adjust yaw rate or vehicle side-slip individually, a novel sliding mode DYC scheme is proposed to regulate both vehicle states simultaneously, aiming to better enhance the vehicle handling and stability. This control scheme guarantees the simultaneous convergences of both the yaw rate and vehicle side-slip errors to zero, and eliminates the limitations presented in the common sliding mode DYC solutions. Comparative simulation results indicate that the vehicle handling and stability are significantly enhanced with the proposed DYC system on-board. Also, this DYC scheme is shown to outperform its corresponding counterparts in various driving conditions.

History

Degree Type

Doctorate by Research

Imprint Date

2014-01-01

School name

School of Engineering, RMIT University

Former Identifier

9921861959201341

Open access

  • Yes

Usage metrics

    Theses

    Categories

    No categories selected

    Keywords

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC